DIY shoe racks

For owners of small-sized apartments, one of the serious problems is the issue of placing shoes in the hallway. This issue is especially acute for families with children. They understand best of all what shoes are that are scattered throughout the apartment.

To preserve and maintain order in the house, it is not necessary to purchase shoe racks in furniture stores; it is quite possible for anyone to make such products. This will not require any expensive materials or tools, there are many available materials from which you can build shoe shelves.

What can a shoe shelf be made of?

For the manufacture of this design, you can use a variety of materials, including wood, metal, polymers. In addition to the above, there are models for the manufacture of which are used plywood, particleboard, metal profile, including pipes.

How to make a shelf for shoes made of wood

Before proceeding with the construction of such a structure, it is necessary to draw a sketch of it, this can be done on paper or on a computer using special CAD programs.

The presence of such a sketch will allow not only to work out its appearance, but also to calculate the amount of necessary material and fasteners, in other words, to draw up a specification for the product.

Necessary materials

For the independent production of wooden stands, you must purchase the material that is defined in the sketch. It can be a solid board, a sheet of plywood, chipboard. For the construction of the back wall, you can use the fiberboard sheet.

Wood, in the form of a solid mass, must be dried, if you use raw wood, you can be sure that after a while the bedside table will lead. To connect the parts of the shoe rack to each other, you can use corners made of metal, support bars. As fasteners, as a rule, self-tapping screws are used.

Necessary tools

The following tool may be required to process the details of the shoe shelf and its assembly:

  • wood saw, manual or electric:
  • plane;
  • screwdriver or screwdriver;
  • abrasive skin on fabric or paper;
  • measuring tool and marker.

Drawings of shelves for shoes made of wood

As noted above, to assemble a shelf with your own hands, you will need a drawing of a future product. You can do it yourself. To create it, you can use samples from furniture catalogs or search for ready-made sets of drawings.

Standard shelf for shoes made of wood step by step

For the manufacture of a typical design, it will be necessary to prepare a wooden board, its optimal width is 250-350 mm, and the thickness is 20-25 mm. To create support bars, it is necessary to prepare a wooden beam of square section with a size of 25 * 25 mm.

The process of making the shelf will look like this:

  1. From the prepared boards, it is necessary to cut out the side walls with a length of 800-900 mm each.
  2. After this, it is necessary to make supporting bars and transverse crossbars.
  3. Shoe shelves must be cut to a length of 600-700 mm.
  4. All obtained blanks must be treated with sandpaper. This is necessary to remove the burrs that remain after processing the hacksaw.
  5. To install the shelves, it is necessary to install supporting bars, they are screwed with screws.
  6. After that, the finished shelves can be installed on the fixed bars.

After assembly, it makes sense to cover with varnish or paint, this will save the structure from contact with water, which can drain from the shoes.

On a note! From such a cabinet you can quickly make a ottoman, which you can sit on while putting on shoes. To do this, it is enough to lay a layer of foam rubber on the upper shelf and cover it with artificial leather.

Wooden Shoe Shelf with Hidden Mount: Walkthrough

To perform the fastening of the side and transverse shelves between themselves, not only self-tapping screws are used, but also hidden fasteners. This is used for furniture production in serial production. To install such fasteners you will need a drill for wood and a perk. With a simple drill, make a hole in the sidewall, and in the panel that will be connected to it. Another drill will be required to countersink the hole for the bolt head. This diameter should exceed the first one by 1-2 mm. The exact size can be determined by measuring the size of the head using a vernier caliper. When drilling, it is necessary to strictly observe the horizontal operation of the drill, otherwise the hole may go out and the shelf will be damaged. Using a perk, make a hole for installing a nut from a set of hidden fasteners.

There is a recess in the head of the bolt for installing a decorative plug.

The build process looks like this: A nut is installed in the nut hole, and a bolt is inserted through the punched hole, thus, a reliable connection of the side and transverse shelves will be obtained.

When performing the operation to install hidden fasteners, carefully measure all the locations of the hidden fasteners. As a rule, two such joints are used to secure the sides and shelves. The distance from the edges should be at least 30 mm.

Putting a shelf in the hallway out of wooden boxes

Another interesting solution is the manufacture of a shoe shelf from ordinary container boxes, which can be found near any store. The only condition is a plank from a box should not be too thin, for example, like on a fruit container. Therefore, you can use those that transport products packaged in glass containers.

Such boxes allow you to store shoes of any type, for example, high boots or felt boots.

How to make a do-it-yourself shoe rack

As already noted in the manufacture of shoe racks, you can use a variety of materials, including finished products, for example, crate boxes, designed to transport glass containers or other products.

The sequence of operations in the manufacture of glass containers is as follows:

  1. Development of the sketch necessary for calculating the amount of necessary material and fasteners.
  2. Production of the necessary blanks - side walls, supporting bars.
  3. Preparation of places for fastening shelves.
  4. Assembly of the product based on the developed sketch.
  5. Surface treatment with paints and varnishes, this kind of treatment, allows you to protect the surface of the shoe shelf from moisture that drains from the shoe.

DIY Glass Shoe Shelf: Walkthrough

No one will argue with the assertion that glass was often used to create home and office furniture.

Fortunately, modern technologies for obtaining this material provide it with sufficient strength, able to withstand both dynamic and static loads.

For the manufacture of a shoe shelf, it makes sense to use tempered or laminated glass (triplex). Acrylic materials can be scratched by sand accumulating on shoes.

To make the simplest shelf, it is necessary to prepare three sheets of glass with approximately the following dimensions 900 * 300 * 10 mm. The distance between them can range from 250 to 300 mm, this distance is enough to install bulky winter boots. It is also worth paying attention to the following points:

  • Glass shelves can be made with or without side walls. It should be noted the use of glass sides, which ultimately complicates the design.
  • Sheets of glass can be made independently, or can be ordered in a glass workshop, where they will provide the necessary size and shape of the shelves.

Several methods can be used to assemble such a structure. In order to avoid drilling glass, and this is a rather complicated process that is difficult to perform at home, you can use the following scheme, cut pieces of metal or plastic pipes to the height of the distance between the shelves, and install plugs on them. An adhesive is applied to the surface of the plugs and placed in accordance with the sketch.

Side structures can be made of metal or wood and their fastenings can be equipped to hold the shelves. If you still managed to get holes, then you can install the pins and fix the hardware on them to hold the shelves at a given height.

Important! It is necessary to remember the gap between the lower shelf and the floor covering, that is, it is desirable to install the support legs.

A shoe rack made of glass requires constant care, since all dirt is clearly visible on its surface.

Interesting ideas for DIY shoe shelves

A shoe rack is the furniture that can be used to create the most daring ideas. For example, use as the main material water pipes and fittings. With their help, you can create both stand-alone structures, and shelves that can be fixed to the wall.

  • Some homeowners use as their primary material cardboard boxes.
  • For a country house, a product made in a rustic style is quite suitable, for this you can use thick boards, and such a shelf can play the role of a bench for an evening vacation.
  • To store shoes in the hallway use empty bottles.

In other words, when arranging this furniture, the homeowner can use almost all the materials at hand.

Watch the video: How to Build Simple DIY Shoe Rack Shelves! (March 2024).

Leave Your Comment