DIY hair dryer holder: wire, plastic, wood

Lovers of drying hair in the bathroom are well aware of the problem: where to put the hair dryer. And numerous detectives, ours and foreign ones, regularly scare them with a hairdryer in water, as the most popular way of killing. And what to do? There is only one way out - to purchase a special holder for a hairdryer or to make it yourself.

What should be the stand for the hairdryer

First, determine what requirements must meet the holder for the hairdryer.

Convenient to use, to hang and remove the device from it, it was possible without difficulty.
Stainless and free from harmful substances that can react with moisture or evaporate when heated.
Properly positioned so that the appliance cannot fall into the bathroom or sink. And also to prevent splashes on it, and at the same time it was available.

Store holders, as a rule, already meet the criteria of safety and ergonomics. And in the manufacture of such a device yourself will have to carefully think through and calculate everything.

DIY materials and tools making

The best materials for the hair dryer holder will be plastic, stainless steel and moisture-resistant alloys, moisture-proof plywood and wood.

Depending on the choice of feedstock and device design, you will need a different tool.

Glue and soldering iron when working with plastics and plastic.
Grinder and welding for metal.
Jigsaw and wood glue when using plywood or wood.

Consider the most budgetary and easiest to manufacture holders and figure out how to make them yourself.

How to make a hair dryer stand

From plastic bottles

The easiest and absolutely not expensive option - a holder of unnecessary bottles for drinks. Both milk and lemonade will do. It is enough to measure the length of the hair dryer and cut the cylinder of the desired length with ordinary scissors or a knife.

For the convenience of the location of the handle of the device, you can make a rectangular or figured cutout on the front or side. The edges of the cuts must be melted with an iron or a soldering iron, so as not to injure your handsand.

It is best to place such a device on the wall with a hook or self-tapping screws.

You can decorate the holder with the help of fabric, and with the help of paint, and with the help of rhinestones or stickers.

Metal wire

Shop accessories are made in the form of a spiral of elastic wire. If the same wire is available in the garage, then you can make the holder yourself.

To work, you will need:

wire;
welding;
self-tapping screws;
round pipe or log.

First you need to bend 2 wire rings with the help of a pipe or a wooden kruglyash.

Important! The diameter of the rings should be such that the hair dryer passes quietly inward, but does not slip through the rings.

Next, we fasten both rings on a vertical basis by welding. The distance between them should be 2-3 cm less than the length of the hair dryer to the handle.

The wall part can be made of double-folded wire so that the “eye” remains on top for fastening with screws. And you can create a real masterpiece "forged" in the style of country or lace in the style of Provence.

From plywood

Wood and plywood are the most fertile material for creating decor. Why not make a hair dryer holder out of them? It can be a rectangular basket, where not only a hairdryer can be placed, but also a bunch of other useful little things.

You can create a carved masterpiece. Or such a cute fence for decorating the bathroom of a country house.

From drain fittings

If, after laying the plumbing system and drain equipment, you still have extra splitters, then you can put them into action. Great holders for hair dryers, combs and other useful little things will come out of them.

There’s no need to tinker here, just fix the splitter on a shelf or on the wall and decorate it to your liking.

Design options and stand coasters

When choosing a holder decor, you must first pay attention to the overall style of the bathroom.

If a lot of plastic is used in the bathroombright and functional things then holders made of fittings or plastic, painted in bright colors, will harmoniously fit into the environment.