How long should the laminate lie before laying

In order for the laminate to lay evenly when laying, and there are no gaps between the dies, it is necessary to place the material in the very room in which the floors will be laid. For many, this measure seems unnecessary, but this need is primarily due to the structure of this material. The shape and integrity of the laminate may be impaired due to various circumstances, such as humidity, temperature, etc. That is why before laying, you need to give him time to lie down. This is especially important in cases where before that the panels were in an unheated and cold room with humidity different from the place where they will be installed.

How much time should be laid before laying

How long should the laminate lie before laying? Laminate should "get used" to the surrounding environment for some time. This usually takes at least two days. It is allowed to leave it for a longer time, in order to avoid the appearance of gaps and damage at the joints of the plates.

What will happen if the material does not lie down

Since the base of the laminate always contains wood, this material is quite sensitive to a sharp change in humidity or temperature. This makes him prone to change the shape and integrity of the structure, which leads the panel to complete disrepair.

However, a slight distortion is also possible. In this case, the joints will just stand out very much, and the floor may turn out to be uneven.

Rules for keeping the material before laying

In order for the material not to deform during the "acclimatization", it should be stored in special packaging in a horizontal position. Violation of this rule may lead to deformation.

During laying, you can prepare the necessary tool for further work. And also, in order to save time, it is necessary to process the surface on which the material will be located. To lay the laminate, dry and clean the floor. Then lay a special backing. You should also decide in advance which layout to lay the laminate on. To select the best option, you should look at all possible images with different types.