How to put tiles on a wooden floor

Tile is one of the most popular coatings, which has impressive technical characteristics and is also an ideal choice in terms of price / quality ratio. But this coating is used not only in many rooms of the city apartment, but also in private houses. How to put tile on a wooden floor? What features should be considered and how to prevent annoying mistakes? This procedure can be handled independently without the help of specialists. You will learn how to do this in this article.

Can tiles be laid on wooden floors

Most masters do not recommend such a procedure. And there are several reasons for this.

First of all, the life of these two materials is significantly different. Wood will deteriorate much faster than ceramics, which will lead to a displacement of the base, and consequently, to fracture of the tile. In addition, experts warn that the floor will become very cold. If you are used to warm wood, then the first time the operation of cold ceramics can be quite unpleasant.

The condition of the wood will also be affected by the fact that under the tile layer it will not be able to "breathe", that is, be exposed to air. Under such conditions, natural material will deteriorate faster, which means that the shelf life of such a coating will be even less.

But, despite all these disadvantages, sometimes the need to put tiles on a tree still arises. This happens when the floor is constantly exposed to moisture.

How to lay a tile on a tree

There are several different ways to complete this procedure. Each of them has its own characteristics, so in order to choose the most suitable, you need to get acquainted with all.

Dry leveling method

Before starting work, it is necessary to level the base. Laying is done according to the sheets that are used to level the floor on the logs. In this way, a wide variety of materials can be used.

These materials usually fit in two layers, but it also happens that the initial state of the substrate requires only one layer. The plates are fastened with self-tapping screws, but it is important to consider the installation step so that the plates do not stagger during walking and further operation.

ATTENTION! In rooms where there is an increased level of humidity, as well as the floor is constantly exposed to water, processing of the coating with waterproofing is mandatory.

Thus, the tree can be protected from premature decay and unsuitability of the entire floor. In addition, the primer is an important step.

Wet screed

Another method is used, which will significantly increase the strength of the wooden base. This is a screed that is quite wide and does not attach directly to the tree. It is separated from everything else with a waterproofing material.

Before starting work, alignment of the base is also carried out. Most often this happens with the use of cement-based solutions.

Quick surface preparation

With this option, sheets of drywall are laid as a separation layer between the wood and the tile. They are arranged so that the edges do not move on top of each other.

ATTENTION! Sometimes cardboard is laid in two layers, which increases the strength of the base and allows you to lay the tiles so that the owner is as pleased as possible with the result.

Cardboard is attached using special glue, which can be purchased at the store. The choice of glue is a responsible task that requires special attention. The quality of fixation depends on it.

If the wood floor is in poor condition

If the inspection of the wooden base did not give a very positive result and the floor is in poor condition, you will have to replace it entirely.

In this case, you can choose one of two options: either put the same wooden coating, and then cover it with ceramic tiles, or use a cement screed.

If you recall the huge number of minuses that the option of combining wood and tile has, of course, cement will be the best choice.

IMPORTANT! Please note that in wooden houses, floors between floors are also wooden. Then you have to use an exclusively dry screed - the floor may not be able to withstand such a load.

Such repairs will be needed when the wood begins to rot, creaks constantly appear and there is a large number of fungi.

A huge amount of materials can be used as a dry screed. To choose the most suitable, go to a specialized store and consult with the seller. He will talk about all the advantages and disadvantages of any material, as well as recommend the necessary, based on your needs and taking into account the conditions in which repairs will be carried out.

Now you know why laying tiles on a wooden floor is undesirable, what to do if it is nevertheless necessary and how to determine the condition of the floor before starting work. Both tile and wood are excellent materials, which, nevertheless, are designed for various conditions. That is why you should not be upset if you have to cover the wood with cold tiles - a wooden floor will be more appropriate in another room.

Watch the video: How to Lay Tile Over Plywood (March 2024).

Leave Your Comment