How to clean your headphones

Any technique needs periodic cleaning of accumulated dust and dirt particles. The process of pollution occurs gradually and imperceptibly for us, since in the case of modern technological devices there are many small parts and gaps between them. Today we will consider the type of technology that every person uses on a daily basis. It's about the headphones. All people like to listen to music, and the headset does an excellent job of this. However, few people pay attention to the abundance of microorganisms and various dirt that accumulates with constant use.

In order to maintain their health and prolong the normal functioning of the equipment, it should be periodically inspected and thoroughly cleaned. If you do not have experience in processing headphones, we suggest using the instruction that details the cleaning steps.

Since there are various headset options, we will talk about each of them. Let's start with the liners. This model is primarily distinguished by the fact that the plastic ear cushion is directly inserted into the ear and comes into contact with it. Accordingly, the cleaning mechanism will be as follows:

  1. If the device version allows you to disassemble the case, you need to unscrew the cover and remove the special mesh. After that, soak them in an alcohol solution and dry them with cotton or cloth.
  2. In the case of a non-separable design, it is possible to clean only the outer surface.
  3. First of all, remove large particles of dirt and dust with toothpicks or a pointed match.
  4. Then moisten the cotton wool with alcohol and treat the headphone case. This will remove the remaining dust and destroy the germs.
  5. After completing the manipulations, let the equipment dry.

IMPORTANT! When washing and wiping with cotton pads, do not allow liquid to get inside, as this can lead to malfunctions.

Vacuum headphones are a better version, because they sound better than in the previous model. This vacuum effect is achieved thanks to special silicone ear cushions that completely cover the ear canal.

Due to the design features, such a model is more difficult to maintain. But the instruction will help to cope with the task:

  1. Carefully remove the ear pads from the headphone housing, being careful not to tear them. This is best done in smooth circular movements.
  2. Spray the nozzles with alcohol and put on a paper towel to dry.
  3. Place the headset with the net down and set it so that it is immersed in a solution of alcohol or hydrogen peroxide. Leave it for 10-15 minutes.
  4. After that, wipe the wires and external parts with a cotton pad moistened with alcohol.

A few hours after drying completely, you can enjoy your favorite music again.

The most difficult thing is to take care of full-size or overhead versions of devices. The process of cleansing them will take more time, but it is quite easy to complete it, if you follow the scheme:

  1. Prepare a container with an alcohol solution and a brush with a hard pile in advance.
  2. Disassemble the ear pads and remove the tips from them. There are models that do not understand. This should be clarified in advance with the sellers or in the operating instructions.
  3. Dampen the brush in the solution and carefully treat the surface of the headphones.
  4. Wipe the outside first, then carefully clean the inside.

When working with electronics, try to avoid getting liquid on it to prevent the possibility of a short circuit and breakage of the device.

If for you in the first place is the speed of cleaning, but you need to do everything qualitatively, you can use the accelerated method for this purpose. There are several possible ways to do this. We will describe the simplest one that does not require disassembling the system:

  1. Remove large particles and dust lumps with a brush or toothpick.
  2. Wipe the technique with a cotton swab and then with a cotton swab moistened with hydrogen peroxide.
  3. Dry your headphones with a dry cloth, further removing dust.
  4. After drying, you can use the headset. The process takes no more than 5-7 minutes.

ATTENTION! This method is perfect for quick cleansing. But periodically, the headphones should be washed thoroughly, removing accumulated dirt and sulfur inside. Use deep cleaning for this.

Among the many options for cleaning up accumulated dirt to eliminate the causes of bad sound there are those that not only do not correct the situation, but also worsen it. Here's what you can't do with headphones:

  1. Do not disassemble the case if you are not sure that you can do it right. Also, do not disassemble the headset, if it is not provided by the design.
  2. It is worth remembering that even a small amount of liquid can damage electrical circuits and wires. Therefore, do not rinse the equipment with water and especially soak or wash it. Allowed only wiping with wet wipes or cotton.
  3. In order not to scratch the case, do not use hard or sharp metal objects when cleaning.

Take care of your technique, and it will serve you for many years.

Watch the video: How to Clean AirPodsApple EarPods: remove wax cleaning your earphonesearbuds safely, quick & easy! (March 2024).

Leave Your Comment